| item | Specification |
| CPU | MSTAR MSB2531 800MHZ |
| Nand FLASH | 2G |
| SDRAM | DDR2 128M |
| display | 7.0 TFT, resolution 800*480,16M color |
| SD card | Support 128M-32GB |
| Working temperature | Working : 0~60℃ static :0~80℃ |
| color | black |
| Working time | < 5h |
| Standby time | < 72h |
| GPS receiver | Built-in/external |
| GPS antenna | Built-in/external |
| locate | Cold restart 2 minutes；hot restart 1 sencond |
| LED power light | green : working or charging fully |
| red : charging or low power | |
| Charging | input:100~240V AC output:5V DC, 1.5A |
| car charger | |
| input :10~30V ,1.3A MAX output :5V , 1.5A | |
| Battery | Operation |
| Operate system | Windows CE.NET 6.0 |
| Navigation software | |
| Video file | .avi\.mpg\.wmv..etc |
| Music file | .mp3\.wma\.ogg.etc |
| Picture file | .jpg\.bmp\.gif etc |
| TXT | .txt |
| language | · English / simplified Chinese |
PND is a mini table , it is used for our vehicle GPS tracker GVT-900 and GVT-800 ， all function as below , pls check :
· Set parameters: APN (with user name, password), IP, Port, Terminal ID.
· Display information: Speed, speed limit, direction, time, signal & connection.
· Receive message from center (voice remind), support group sending. Send pre-set text message to center.
· Two-way voice communication, can call & receive call. 4 pre-set numbers.
· Over speed alarm; settings for other information. Read USB device
· Read/write IC card. Driver can insert IC card for check in/check out.
